Mineral Fibre Glazing Products
FS9009 “CERAMIC TYPE” GLAZING TAPE
Available since 1998, FS9009 is manufactured using spinning technology, and is based on a calcium-magnesium-silica chemistry. It gives excellent thermal and physical stability up to its operational limit of 1100ºC, and has a melting point in excess of 1,330º C. FS9009 contains no carcinogenic ceramic fibres so is a vast improvement over older style ceramic tapes. FS9009 can be used in a whole range of applications as thermal insulation, particularly as glazing tape in fire rated steel doors. It is only available in white and is lightweight and flexible in use. It has been included in successful fire tests up to four hours on steel doors with LoPro rectangular vision frames. WF Report No 170067 to BS EN 1634.1:2000 refers. FS9009 should be subject to 50% compression.
9782375PSA : 2mm thick x 10mm wide ceramic type glazing tape, PSA backing
9157375PSA : 4mm thick x 10mm wide ceramic type glazing tape, PSA backing
9236375PSA : 6mm thick x 10mm wide ceramic type glazing tape, PSA backing
———————————————————————————————————————————————————
FS8008 INTUMESCENT CERAMIC GLAZING TAPE
FS8008 is an intumescent ceramic material which expands to three times its original size, beginning at
approximately 340°C. Increasing temperature leads to increasing char height as the matting expands and forms a thermally insulating mat of low density. It is supplied self adhesive one side as standard but can be supplied with double sided self adhesive tape to special order. FS8008 must be protected against constant humidity.
8782375PSA : 2mm thick x 10mm wide intumescent ceramic glazing tape, PSA backing
8196375PSA : 5mm thick x 10mm wide intumescent ceramic glazing tape, PSA backing
———————————————————————————————————————————————————
SB12 IMPREGNATED SETTING BLOCKS FOR FIRE RESISTANT GLAZING
Setting blocks for fire resistant glazing are made of water-repellent inorganic aluminium-silicate. Application temperature up to 1100°C. Available in thicknesses of 2mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm and 20mm. Standard thickness 2mm and 5mm, and standard widths of 6mm, 8mm, 10mm, 20mm and 24mm to suit glass of same thickness. Must be kept dry, and unsuitable for applications of permanent wetness.
SB12.8062 : 80mm long x 6mm wide x 2mm thick, setting block for 6mm glass
SB12.8082 : 80mm long x 8mm wide x 2mm thick, setting block for 8mm glass
SB12.80102 : 80mm long x 10mm wide x 2mm thick, setting block for 10mm glass
SB12.80202 : 80mm long x 20mm wide x 2mm thick, setting block for 20mm glass
SB12.80242 : 80mm long x 24mm wide x 2mm thick, setting block for 24mm glass
———————————————————————————————————————————————————
Please click here to see full product details and catalogue page, or phone +44 (0) 1785 282910 for assistance.